Mini Cooper
Designed as project ADO15 (Austin Drawing Office project number 15), the Mini came about because of a fuel shortage. In 1956, as a result of the Suez Crisis which reduced oil supplies, the United Kingdom saw the re-introduction of petrol (gasoline) rationing. Sales of large cars slumped, and there was a boom in the market for so called Bubble cars, which were mainly German in origin. Leonard Lord, the somewhat autocratic head of BMC, decreed that something had to be done quickly. He laid down some basic design requirements: the car should be contained within a box that measured 10 × 4 × 4 feet (3 × 1.2 × 1.2 m); and the passenger accommodation should occupy six feet (1.8 m) of the 10 foot (3 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small: as well as Issigonis, there was Jack Daniels (who had worked with him on the Morris Minor), Chris Kingham (who had been with him at Alvis), two engineering students and four draughtsmen. Together, by October 1957, they had designed and built the original prototype, which was affectionately named 'The Orange Box' because of its colour.[2]
The ADO15 used a conventional BMC A-Series four-cylinder water-cooled engine,[9] but departed from tradition by having it mounted transversely, with the engine-oil-lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since have used a similar configuration. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so that it blew air into the natural low pressure area under the front wing. This location saved precious vehicle length, but had the disadvantage of feeding the radiator with air that had...
Please login to view the full essay...